|
Post by hondacat on Apr 29, 2012 14:03:19 GMT -5
|
|
|
Post by hondacat on Apr 9, 2013 7:14:18 GMT -5
And now for the specs on the traxs tech rigger electrical installation requirements so many have called and asked for
90A breaker at the power source 6g two stranded shielded marine wire supported every 12" blue sea fuse panel with ground buss and cover 10G shielded stranded marine wire to marine co trolling motor plugs supported every 12" separate run for each rigger EACH RIGGER MUST BE ON ITS OWN PROTECTED 10G WIRE FEED TO PERFORM PROPERLY PLEASE DO NOT CALL AND ASK FOR TECHNICAL SUPPORT ON RIGGERS OR OTHER ELECTRONICS PURCHASED ELSEWARE if you bought your riggers from us and there is any questions please call we don't want to leave any stones left unturned or questions left unanswered we proudly support our customers with up to date information when ever possible.
|
|
|
Post by hondacat on Nov 22, 2016 20:57:52 GMT -5
bump to top of list
|
|